Innosilicon, the industry leader of all coin crypto mining ASICs, launches another heavy weight BTC miner, the T2T-26T (also has 4 work modes). In the high power mode, the hash rate of Innosilicon T2T-26T miner is 26Th/s (± 5%), but energy consumption is only 2100w (+ 10%).
T2T-26T Miner has 4 work modes as follows:
|High Hash Mode||Factory Mode /Default||Balanced Mode||Efficiency Mode|
You can choose any kind of work modes as you wish. INNOSILICON T2T-26T Miner will help you go through the bear market and occupy the leading position in the bull market.
Please make sure proper cooling, dust filter and 16A AC cable are used on your farm to meet the proper operating condition requirements: Humidity <75%, AC voltage 210~240V, Power supply AC input current 16A and dust <0.5 Mg/m3.
1. Delivery time: Shipment will be made within 7 business days after payment confirmation.First paid, first served.
2. Please be aware: T2T-26T PSU is inclusive, and the PSU we provide is specially customized for our miners. Since customers require different types of plugs, the PSU does not contain 220V AC cables. You can order the standard IEC C14 AC power cable to use with the PSU.
3. T2T-26T PSU is more than 2000W, so please purchase AC cable with 3*2.0 specifications, and 3 wire cores with diameter no less than 2.0mm.
4. Please write down the recipient's name, contact information and address carefully. Shipping address cannot be changed once the order is submitted. We will ship according to the information given to us. You will be responsible for any damages or losses caused by errors in the information.
5. We guarantee the safety of the goods until they are in the hands of the shipping carrier. Once the shipping carrier has accepted the goods, the ownership of them will be transferred to customers. Any damage or losses of the goods during transport and import customs clearance will be charged to the buyers.
6. To ensure the security of high-value miners in transit, we have been implementing shipping insurance since December 26th, 2017.We will use the company name (if not available, then the name of the buyer) as the insured party. Please make sure that the information is correct.
All Innosilicon T2T-26T will be tested by factory before shipment and certified by Innosilicon. The post-sales service policy is as follows. After payment, your order will be processed immediately.
180 days parts warranty for any miners directly purchased from Innosilicon. If any problem, please leave an after-sales message on our message board. Our technical support team will get in touch with you asap.
Please don’t send any machine or parts without contacting the technical support team first. Any loss or damage as a result of lack of contact will be the responsibility of the customer.
The price of miners may be adjusted at any time without prior notice or price compensation to customers.
The warranty expires in the following cases:
If one of the cases above happens, you shall be charged for your miner maintenance services. For the specific procedures, please refer to the after-sales process.
Notes: Please ensure your miners are taken care of in a proper farm with cooling and dust filter conditions. Warranty expires if you overclock miners or run them at excessive heat or dusty conditions beyond our target range.
Powered by PHPCMS