USB 2.0/HSIC PHY (Host/Device/OTG/Hub)

The INNOSILICON USB 2.0 OTG PHY is fully compliant with UTMI+ level 3 Rev 1.0 specification. Offering excellent performance combined with a die size up to 30% less than competitor's solution, this PHY is the perfect companion to your design. The impressively small die size offers all functionality needed for a complete USB solution including HS, FS and LS support with OTG, as well as all required I/Os, primary and secondary ESD, self-calibrated DP/DM termination and an integrated PLL.

The UTMI+ interface can be pre-configured for either a 30MHz 16-bit, or 60Mhz 8-bit data interface.

If your solution requires more than one USB port, a further size efficiency can be achieved by choosing a multi-port solution. The INNOSILICON USB 2.0 PHY is available in 1, 2, 3 and 4-port configurations.

To support production test with high coverage, this PHY includes BIST, loop back, and boundary scan functionality.

KEY FEATURES:

Silicon proven in 14, 28, 40, 55, 65, 90 and 130nm across SMIC, TSMC & Global Foundries
USB 2.0 OTG spec compliant
8 bit or 16 bit UTMI+ interface compliant with UTMI+ specification level 3 Rev 1.
Battery charging support
HUB mode with 40 bit time round trip delay
Boundary Scan and Loop back BIST modes
Supports all USB 2.0 specified test modes
Built-in I/O complete with primary and secondary ESD structures
On-die self-calibrated HS/FS/LS termination
12/24MHz crystal oscillator with Integrated phase-locked loop (PLL) oscillator
Low power operation, 80mW analog power Max for 2 ports High speed transmission

BLOCK DIAGRAM:

INNOSILICON ADVANTAGES:

Low power consumption
Fully customizable
High speed hub use VLPI low latency
Small area
Simple integration process
Available options include
- Test chips and test boards
- FPGA integration support
- Chip level integration

EXAMPLE APPLICATIONS:

MP3/MP4/MP5 and handheld devices
USB2.0 storage devices
USB2.0 Hub
Computer Peripheral

TELL US WHAT YOU NEED We will provide a solution customized to best fit your needs.

USB 2.0 Q&A

What processes are available?

USB2.0 HOST/Device/OTG/Hub PHY:
GF 14LPP
SMIC 28PS, GF 28SLP, TSMC 28HPM, TSMC 28HPC, TSMC 28HPC+
SMIC 40LL, TSMC 40LP,
SMIC 55LL, GF 55LPX, XMC 55LP, TSMC 65LP
SMIC 90G
SMIC 110G, TSMC 110G
SMIC 130G, TSMC 130G

HSIC:
SMIC 28PS, GF 28SLP, TSMC 28HPC, TSMC 28HPC+
SMIC 40LL

What package can you choose?

Supports small form-factor LQFP/LQFN; Supports BGA

What makes our USB 2.0 different?

Small die size, easy to integrate
Low power consumption
High speed hub uses VLPI low latency
Test chip and test board available
FPGA integration Support
Customized Service
- Add UART function
- VBUS voltage
- Customize IO layout